Once the control has been paired and configured, it can be brought onto the main living space and either be placed on a flat surface by using the desk stand that is provided or can be mounted to the wall. A mounting template is provided to assist in placing the mounting anchors and screws at the appropriate location. The control unit should be placed as close to directly above the ventilation unit as possible to maintain good connection. The control unit should also be out of the direct sunlight and away from any other heat source as much as possible.
FYI - 2 USB power ports are located on the Control to allow multiple installation configurations, either one can be used to power the control. ***Advise the client to NOT plug 2 separate power supplies in these ports.
Please note: CONTROLLER
If the unit is set up with the Mobile Application, the CONTROLLER is then connected to the router. If NOT then it connects directly to the exhaust...