After both the Humidex and the exhaust vent are properly installed, you can now plug the Humidex in the closest outlet. The Humidex unit possesses a label illuminated by LEDs that will indicate the set humidity preference, if the unit is powered On and if the unit has detected a higher than usual amount of CO.
To set your humidity preference, press the center button of the label to cycle through the different humidity settings.
- If you wish to have the unit on for a continuous basis, press the button until the humidity level reaches 25%.
- If you would like it to run to its minimal capacity, press the button until the humidity level reaches 65%.
- Manufacturer’s suggested setting is to be place the humidity level between 45% and 55%.
The Humidex garage and multipurpose humidity control unit will reduce moisture levels inside your garage or shed. Whether you want to keep your wood dry for your furnace or just want a dryer space, Humidex is the unit that can make it possible.
The Humidex garage unit also contains a Carbon Monoxide(CO) sensor which allows you to monitor CO levels in your garage or shed.
