After both the Humidex and the exhaust vent are properly installed. You can install the humidity label that came inside with the unit. After the label is properly affixed, you can install the control knob unto the Humidex.
 | - Humidity label |
| - Control knob |
After installing the decal and knob, plug the Humidex in the closest outlet. Set the dial to your humidity preference. If you wish to have the unit on for a continuous basis, turn the dial fully to the right (20%). If you would like it to run to its minimal capacity, turn the dial fully to the left (70%).
Manufacturer’s suggested setting is to be placed between 40% and 60% (comfort zone).
The Humidex garage and multipurpose humidity control unit will reduce moisture levels inside your garage or shed. Whether you want to keep your wood dry for your furnace or just want a dryer space, Humidex is the unit that can make it possible.