Unplug unit from power source
before any work is started
Step 1:
  • Remove top cap be removing 4 screws.
  • Straighten the 90° elbow by turning the first 3 sections ½ turn each.  
Step 2:
  • Use the 6” galvanized pipe to extend the length needed.  
  • Cut pipe to proper  length with metal snips before snapping it together.   
  • Make sure 6” pipes are fitted and screwed together.
Step 3:
  • Attach top cap to extension cover with 4 screws provided.  
  • Add exterior cover to base and fasten securely with screws provided.